Diseño y análisis de un pwm adaptado para propósitos educativos
Diseño y análisis de un pwm adaptado para propósitos educativos
Article Sidebar
PDF (Español (España))
FLIP
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Main Article Content
Abstract
The purpose of this article is to document the design and development of a custom pwm (Pulse Width Modulation), for research and education applications specialized in electronics and control of electrical machines. Based on extensive research, the functional requirements of the prototype were defined. Then, using Verilog, the pwm is designed at a low level with specific operational parameters (non-commercial). Among the advantages of the design is its adjustment and programming capacity, ideal to give an approach to people who still do not know the handling of pwm. The prototype was implemented and evaluated on the digital blocks of the PSoC development board PSoC CY8CKIT-059 5LP.
Keywords
Downloads
Article Details
References (SEE)
Rufian. (3 de enero del 2016). ¿Qué es un pwm y cómo funciona en Arduino? [entrada de blog]. Rufian en la Red. Recuperado de https://rufianenlared.com/que-es-pwm/
Cha, W., Kwon, J. y Kwon, B. (2016). Highly Efficient Asymmetrical pwm Full-Bridge Converter for Renewable Energy Sources. IEEE Transactions on Industrial Electronics, 63(5), 2945-2953. Recuperado de https://ieeexplore.ieee.org/document/7360928
Cha, W., Kwon, J. y Kwon, B. (2016). Highly Efficient Asymmetrical pwm Full-Bridge Converter for Renewable Energy Sources. IEEE Transactions on Industrial Electronics, 63(5), 2945-2953. Recuperado de https://ieeexplore.ieee.org/document/7360928
Ninad, N. y Lopes, L. (2012). A Vector-Controlled Single-Phase Voltage Source Inverter Based Grid Interface Suitable for Variable Frequency Operation in Autonomous Microgrids. Electric Power Components and Systems, 40(11), 1266-1284. Recuperado de https://doi.org/10.1080/15325008.2012.689416
Prabaharan, N., Fathima, A. y Palanisamy, K. (2015). New Hybrid Multilevel Inverter Topology with Reduced Switch Count Using Carrier Based Pulse Width Modulation Technique. En J. Bahru (ed.), 2015 IEEE Conference on Energy Conversion (cencon) (pp. 176-180). Recuperado de doi: 10.1109/CENCON.2015.7409535
Pulikanti, S., Konstantinou, G. y Agelidis, V. (2012). Generalization of Flying Capacitor-Based Active-Neutralpoint Clamped Multilevel Converter Using Voltage-Level Modulation. IET Power Electronics, 5(4), 456-466. Recuperado de doi: 10.1049/iet-pel.2010.0373
Sahay, W. (2011). Pattern Separation: A Common Function for New Neurons in Hippocampus and Olfactory Bulb. PMC, 70(4), 582-588. Recuperado de https://n9.cl/yk7r8
Sahay, W. (2011). Pattern Separation: A Common Function for New Neurons in Hippocampus and Olfactory Bulb. PMC, 70(4), 582-588. Recuperado de https://n9.cl/yk7r8
Talebi, S., Nikbakhtian, B. y Toliyat, H. (2007). A novel algorithm for designing the Pid Controllers of High-Speed Flywheels for Traction Applications. En 2007 IEEE Vehicle Power and Propulsion Conference (pp. 574-579). Arlington, Texas. Recuperado de doi: 10.1109/ VPPC.2007.4544188
Trentin, A., Zanchetta, P., Clare, J. y Wheeler, P. (2012). Automated Optimal Design of Input Filters for Direct ac/ac Matrix Converters. IEEE Transactions on Industrial Electronics, 59(7), 2811-2823. Recuperado de doi: 10.1109/TIE.2011.2163283
